TDW 16 inch Ultra Pig – Purging Excellence
An Ohio Gas and Liquids operator needed a pig for a run on a 16 inch 4-mile condensate line needing to be thoroughly purged, the Kerr team recommended that the line be purged in order for the repairs to take place.
TDW Ultra pig in action
When an Ohio Gas and Liquids operator called for advice on a pig for a run on a 16 inch 4-mile condensate line needing to be thoroughly purged, Kerr and TDW were on hand to support. The line needed purging in order for needed repairs to take place.
After visiting the launch site and discussing with the customer their requirements, the 16 inch Ultra Pig with four Ultra discs was selected. This all-urethane pig (less nuts, bolts, and washers) also carried two transmitters. One transmitter acting as a back-up was secured in the front part of the cavity body during the run.
The design of the discs on the ultra-pig are ideally suited to carry out purge operations due to their shape. A key differentiating factor is that the ultra-disc is thicker than the regular sealing discs. As the ultra-disc wears, it has more urethane touching the pipe wall.
Kerr attended the launch and followed up to see how the run went. The line was successfully purged of the condensate and the repairs on the condensate line were able to proceed.
To learn more about TDW Pigs or find Resource guides, see TDW Pig Resource page.
If you have questions, please contact the Kerr Engineered Sales Company who are also available for team for presentations, lunch and learns and customer visits.
Storing TDW Pigs and Unispheres
TDW Pigs/Spheres are constructed with strength, flexibility, and resistance to hydrocarbons. In Volume 2, we cover guidelines for storing TDW pigs and unispheres.
TDW PIGGING INSIGHTS - Episode 2
Overview of Storage of TDW Pigs and Unispheres
TDW assorted pigs
TDW Pigs/Spheres are constructed with strength, flexibility, and resistance to hydrocarbons. For TDW pigs to do the job they were designed for, they must be stored correctly. This blog gives a brief overview, with areas of consideration.
To learn more about TDW Pigs or find Resource guides, see the
TDW Pig Resource page.
tips for storing pigs
Humidity and temperature can have a negative effect on the shelf life of urethane. Shelf life maximized when temp is 75F and humidity less than 50%.
Assembled pigs are ideally stored on a stand supporting the pig’s weight.
Brush/blade pigs should be stored standing on their end. If they are stored on the side, the blades, springs, cups and the supporting the weight of the pig on the ground can lead to deformation.
Cups can be stacked upside down if the weight is not enough to distort lower stacked cups.
Spheres – new spheres are best left in the shipping carton until use. After use, any liquids can be left in the sphere pressurized.
If pigs are stored long term, before using it is important to inspect them carefully. Look for softened/darkened urethane that will compromise performance. For example, if a flat blade screw can be pushed into the material, it is safest to discard the pig.
If you have questions, please contact the Kerr Engineered Sales Company who are also available for team for presentations, lunch and learns and customer visits.
Running pigs through a pipeline? TDW REALSEAL® is the best.
Are you looking for the most effective seal possible when running pigs through your pipeline? The multi-lip RealSeal® cups are designed to provide the most effective sealing surface of any cups on the market.
TDW PIGGING INSIGHTS - volume 1
REALSEAL® – Are you looking for the most effective seal possible when running pigs through your pipeline?
TDW has the answer. The multi-lip RealSeal® cups are designed to provide the most effective sealing surface of any cups on the market. Whether it's a nitrogen purge, commissioning or filling and dewatering for hydrostatic testing, TDW pigs equipped with RealSeal® cups save time and money and perform better than conventional cups.
Features & Benefits
The RealSeal® l option features multiple sealing lips, which means a more effective seal through the pipeline run.
Girth welds in the pipeline allow for multiple leak paths.
Using TDW's RealSeal® cups seals these leak paths where conventional cups do not.
Example of OptionALL 4 Cup 2 Brush Pig with REALSEAL Cups
Typical applications for the RealSeal® options include:
Nitrogen purges
Line filling for hydrostatic testing
Dewatering after hydrostatic testing
Commissioning
Decommissioning
Conversion of pipeline from one product to a different product
Removal of water or other liquids from low points in pipeline
Batch separation
Cleaning
If you have questions, please contact the Kerr Engineered Sales Company who are also available for team for presentations, lunch and learns and customer visits.
NEW - TDW Flange Protection
TDW is now adding protectors like the one pictured on all of their flanges to protect the gasket face. They can be left on during weld procedure and do not need to be removed until the valve is ready to be attached.
TDW now places protectors like the one pictured below on all of their flanges to protect the gasket face. They can be left on during weld procedure and do not need to be removed until the valve is ready to be attached. This helps protect the gasket face while installing. From now on, all TDW fittings will have these protectors fitted.
TDW Flange Protectors
The KERR team is available for presentations, lunch and learns and customer visits.
We at Kerr Engineered Sales Company know how important it is for operators to ensure safe and optimized operations for pipeline products and services. Our team has been offering solutions to pipeline operators for over 70 years, and has represented TD Williamson since 1952. TDW has been providing superior products and services to the industry for over 100 years. We stand behind the promise that TDW offers the best in class Closures in the industry.