Preventing Regulators from Freezing
A compressor station in Eastern PA installed a Bruest Freez-Fiter S20000 to prevent the regulators from freezing prior to cutting the pressure from 1083 psi to 200 psi. If the regulators freeze, they will not work as designed to cut down the pressure.
A compressor station in Eastern PA installed a Bruest Freez-Fiter S20000 to prevent the regulators from freezing prior to cutting the pressure from 1083 psi to 200 psi. If the regulators freeze, they will not work as designed to cut down the pressure. Bruest Freez-Fiters were designed to heat low to medium volume of gas with one or more catalytic heater panels to heat a serpentine process gas coil.
For 60 years, Bruest Catalytic Heater has provided flameless, infrared catalytic heating solutions for the natural gas industry.
The green valve connects to the Freez-Fiter control panel that starts and monitors the heater.
The gray enclosure on the right contains the Freez-Fiter control panel that starts and monitors the Freez-Fiter. The green valve was opened so that the natural gas could flow through the Freez-Fiter and the regulators.
HOW BRUEST HEATERS WORK
Freez-Fiter pilot gas heaters safely and effectively heat low volumes of gas used by pilot regulators and instruments. An electric source is required to warm up the catalytic pad. Once the pads are warmed up, which should take between 15 to 20 minutes, the electric supply can be removed and the gas supply takes over. After the gas is introduced, the catalytic reaction will supply the necessary heat to continue the process. The gas travels through the heat exchange coil to be heated by the infrared heat.
Bruest’s Catalytic Heaters are flameless, free of emissions, low maintenance and safe for hazardous locations. Made in Independence, Kansas, Bruest Catalytic Heaters are the safest, most efficient alternative wherever flameless heat is required.
Download Bruest LDC Brochure
For additional Bruest Catalytic Heater support, training, maintenance or troubleshooting, contact us to speak with KERR’s Application Specialists.
Kerr Engineered Sales Company has been representing leading pipeline repair and performance companies in Eastern US since the company was founded in 1952. Seventy two years later, the company is a third generation family run business serving customers with the highest quality service and support.
Ohio Gas Association March 16 2023
Join the KERR team March 16, 2023 at the Ohio Gas Association Technical Seminar and Vendor Displays Location: Nationwide Conference Center in 100 Green Meadow Drive South, Lewis Center, OH 43035
Join the KERR team March 16, 2023 at the Ohio Gas Association Technical Seminar and Vendor Displays
Location: Nationwide Conference Center in 100 Green Meadow Drive South, Lewis Center, OH 43035.
The Ohio Gas Technical Seminar is open to natural gas distribution and transmission company operations personnel with interests in customer services, utilization, damage prevention, pipeline safety, methane emissions reduction.
There will be a Joint Codes & Regs and O&M Committee Meeting
Kerr Engineered Sales Company has been representing leading pipeline repair and performance companies in Eastern US since the company was founded in 1952. Seventy years later, the company is still a family run business serving customers with the highest quality service and support.
Download the KERR 2023 Line Card
Bruest Freeze Protection Solutions
NGA Fall Operations Conference Oct 6&7
Join the KERR team at the Northeast Gas Association Fall Operations Conference on October 6& 7, 2022 at the Saratoga Hilton, Saratoga Springs, New York.
October 6-7, 2022 Saratoga Hilton, Saratoga Springs, New York
Join the KERR team at the Northeast Gas Association Fall Operations Conference
NGA’s 2022 Fall Operations Conference is open to natural gas distribution and transmission company operations personnel with interests in customer services, utilization, damage prevention, pipeline safety, methane emissions reduction.
The conference has four separate tracks with workshops and breakout sessions on both days. The four tracks include:
C u s t o m e r S e r v i ce s / U t i l i z a t i o n
D a m a g e P r e v e n t i o n
P i p e l i n e S a f e t y M a n a g e m e n t
Me t h a n e E m i s s i o n s & R e d u c t i o n
Kerr Engineered Sales Company has been representing leading pipeline repair and performance companies in Eastern US since the company was founded in 1952. Seventy years later, the company is still a family run business serving customers with the highest quality service and support.
NYS Pipeline Safety Regulatory, Operations Seminar
Join the KERR team at the New York State Pipeline Safety Regulatory and Operations Seminar October 3-6 at the Otesaga Hotel in Cooperstown, New York.
October 3-6, 2022 Cooperstown, New York
Join the KERR team at the NYS Pipeline Safety Regulatory & Operations Seminar.
The New York State Department of Public Service (NYDPS), in association with the U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration (PHMSA), is hosting a Pipeline Safety Seminar at The Otesaga Hotel and Resort in Cooperstown, New York.
Representatives from NYDPS, PHMSA, local gas distribution companies, interstate operators of natural gas and hazardous liquid pipelines, and gathering line operators will be there.
The focus of the seminar will be on operating issues related to pipeline safety including pipeline integrity management programs (IMP), in-line inspection, direct assessment, underground damage prevention, public education and awareness, and new technology development. The Seminar will also include an update on federal pipeline safety rule making and initiatives, including an update on gathering line operators.
Kerr Engineered Sales Company has been representing leading pipeline repair and performance companies in Eastern US since the company was founded in 1952. Seventy years later, the company is still a family run business serving customers with the highest quality service and support.